PLE/N eta
pewag winner profilift lifting point PLE/N Eta.
Tried-and-tested for pull in every direction.
Welding onto machine parts or vehicle bodies requires special products that are ideally suited for the hanging of lifting and lashing parts – and PLE pewag profilift eta (grade 8) is one of them. In fact, the product has made a name for itself among highstrength weldable lifting point, also for its integrated spring that keeps the ring in any position that is required. The product may be loaded in all directions.
Descriere produs
Permitted usage
For load capacities in the permitted directions of pull (fig. Permitted usage and permitted direction of pull), please refer to the load capacity table.
Non-permitted usage
During assembly, ensure that improper loading cannot arise due to any of the following factors:
- Direction of pull is obstructed.
- Direction of pull is not within the indicated area.
- Loading ring rests against edges or loads.
Vedere 3D
Tabel cu specificații
| Method of lifting |  |
 |
 |
 |
 |
|
 |
|
 |
 |
|
| Number of legs | 1 | 1 | 2 | 2 | 2 | 2 | 3+4 | 3+4 | 2 | 3+4 | |
| Angle of inclination | 0° | 90° | 0° | 90° | 0‑45° | 45‑60° | 0‑45° | 45‑60° | asymm° | asymm° | |
| PLE/N eta | Code / Type | load capacity [kg] |
|||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
PLE/N 6 | 1.120 | 1.120 | 2.240 | 2.240 | 1.500 | 1.120 | 2.300 | 1.600 | 1.120 | 1.120 | PLE/N 8 | 2.000 | 2.000 | 4.000 | 4.000 | 2.800 | 2.000 | 4.200 | 3.000 | 2.000 | 2.000 | PLE/N 10 | 3.150 | 3.150 | 6.300 | 6.300 | 4.400 | 3.150 | 6.600 | 4.700 | 3.150 | 3.150 | PLE/N 13 | 5.300 | 5.300 | 10.600 | 10.600 | 7.400 | 5.300 | 11.200 | 7.900 | 5.300 | 5.300 | PLE/N 16 | 8.000 | 8.000 | 16.000 | 16.000 | 11.300 | 8.000 | 16.900 | 12.000 | 8.000 | 8.000 | PLE/N 22 | 15.000 | 15.000 | 30.000 | 30.000 | 21.000 | 15.000 | 31.800 | 22.500 | 15.000 | 15.000 |
| PLE/N eta | Code / Type | load capacity [kg] |
a [mm] |
b [mm] |
c [mm] |
d [mm] |
e [mm] |
f [mm] |
h [mm] |
l [mm] |
weight [kg/pc.] |
|---|---|---|---|---|---|---|---|---|---|---|---|
|
PLE/N 6 | 1.120 | 36 | 40 | 62 | 11 | 67 | 42 | 26 | 35 | 0,31 | PLE/N 8 | 2.000 | 37 | 42 | 69 | 13 | 73 | 45 | 28 | 37 | 0,40 | PLE/N 10 | 3.150 | 41 | 45 | 78 | 16,50 | 80 | 47 | 34 | 40 | 0,63 | PLE/N 13 | 5.300 | 61 | 55 | 99 | 22 | 97 | 53 | 44 | 50 | 1,46 | PLE/N 16 | 8.000 | 63 | 70 | 120 | 25 | 120 | 73 | 48 | 64 | 2,30 | PLE/N 22 | 15.000 | 89 | 97 | 163 | 33 | 163 | 92 | 70 | 90 | 5,40 |
| Safety factor 4 Important: Subject to technical changes! |
|||||||||||
Downloads
PLE/N 10 |
|
|
|
PLE/N 13 |
|
|
|
PLE/N 16 |
|
|
|
PLE/N 22 |
|
|
|
PLE/N 6 |
|
|
|
PLE/N 8 |
|
|
|